Fusion Hemp Oil

This all natural Hemp Oil Wood Finish is very easy to apply. Simply pour or brush on and wipe away the excess with a rag.

For Furniture, or table tops and even floors this oil does not leave a surface film that will chip or scratch.

As an added bonus, this oil does not need to be cut with any solvents as it is a natural pure drying oil all on its own.

Applying Hemp Oil couldn’t be easier, use a brush or rag to apply it, and remove any excess oil after about 1 hour.

Coverage will vary, taking into consideration what the oil is being applied to. For example, a previously oiled surface will require very little oil, where as bare wood will require more. Let the wood tell you what it needs, if it looks dry, simply add more!

TIP: The oil will feel dry to the touch one day after the initial application, however complete drying can be several days.

For example if there is too much oil initially applied, then small amounts of oil may rise over the first few days. This can be avoided by wiping the excess away with a cloth. If used on a floor during this time it is recommended to place some cardboard pieces where there will be a lot of foot traffic. Dirty shoes should be kept off for at least two weeks.